همه محصولات
  • HUATEC GROUP CORPORATION
    باب
    Astm E114-15 Inch Type 1018 Test Block Carbon Steel Mini Iiw 2
  • HUATEC GROUP CORPORATION
    ویلیام
    Astm E114-15 Inch Type 1018 Test Block Carbon Steel Mini Iiw 2
  • HUATEC GROUP CORPORATION
    تام
    Astm E114-15 Inch Type 1018 Test Block Carbon Steel Mini Iiw 2
  • HUATEC GROUP CORPORATION
    لئو
    Astm E114-15 Inch Type 1018 Test Block Carbon Steel Mini Iiw 2
تماس با شخص : Noah
شماره تلفن : +8613911115555
واتساپ : +8613910983110

Digital ASTMD2240 / JISK7215 0 - 100HC Shore Durometer HT-6510C

  • Digital ASTMD2240 / JISK7215 0 - 100HC Shore Durometer HT-6510C
  • Digital ASTMD2240 / JISK7215 0 - 100HC Shore Durometer HT-6510C
  • Digital ASTMD2240 / JISK7215 0 - 100HC Shore Durometer HT-6510C
  • Digital ASTMD2240 / JISK7215 0 - 100HC Shore Durometer HT-6510C
  • Digital ASTMD2240 / JISK7215 0 - 100HC Shore Durometer HT-6510C
محل منبع پکن
نام تجاری HUATEC
گواهی ISO, CE, GOST
شماره مدل HT-6510C
مقدار حداقل تعداد سفارش 1PCS
جزئیات بسته بندی بسته صادرات استاندارد
زمان تحویل 1-4 روز
شرایط پرداخت T/T، Paypal، وسترین یونیون
قابلیت ارائه 500 عدد در ماه

برای نمونه ها و کوپن های رایگان با من تماس بگیرید.

واتساپ:0086 18588475571

وی چت: 0086 18588475571

اسکایپ: sales10@aixton.com

اگر شما هر گونه نگرانی دارید، ما 24 ساعت کمک آنلاین ارائه می دهیم.

x
جزئیات محصول
محدوده اندازه گیری 0-100HC انحراف اندازه گیری ＜1% H
منبع برق باتری 4x1.5V AAA (UM-4). نشانگر باتری نشانگر کم بودن باتری
برجسته کردن

digital shore durometer,portable shore durometer

,

portable shore durometer
پیام بگذارید
توضیحات محصول
Digital Shore Durometer Form Hardness Tester Plastic Durometer
 
Product synopsis
Product info: digital durometer for shore hardness testing pocket size model with integrated probe
Test scale: shore hardness
Standards: DIN53505, ASTMD2240, ISO7619, JISK7215
Parameters displayed: hardness result, average value, max. value
Measurement range:0-100HC
Measurement deviation:＜1%H
Resolution: 0.1
Auto switch off
With RS232C interface
Operating conditions: 0℃ to 40℃
Power supply: 4x1.5V AAA (UM-4) battery
Battery indicator: low battery indicator
Dimensions: 162x65x38mm

Weight (not including probe):173g

 

Standard accessories:
Main unit
Zero Calibration plate
Carrying case
Instruction Manual
Certificate

CALIBRATION CHECK
To check whether the tester is accurate, just Insert the indenter into the hole of the calibrated test Block. Apply enough force to make firm contact between the top surface of the test block and the presser foot. The reading
should agree with the value stamped on the test block. If not, just carry out Zero calibration and High end calibration.

Zero calibration
Hold the durometer vertically with the point of the indenter hanging in the air, the reading on the display should be '0'. If not, depress the 'ZERO' key to make the tester display '0' .

High end calibration
Just place the indenter onto a flat glass, apply enough force to make firm contact between the glass and the presser foot. The readings on the display should lie between 99.5 and 101. If not, press CAL key to carry out high end calibration.

BATTERY REPLACEMENT
When the battery symbol appears on the display, it is time to replace the batteries.
Slide the Battery Cover away from the tester and remove the batteries.
Install batteries paying careful attention to polarity.

NOTE
Readings below 10HD for Shore D type may be inexact and should not be reported for some materials. Measurements should be made on a Shore A type.
Readings above 90HA for Shore A should be made on a Shore D type durometer

 

برچسب ها:

دورومتر ساحلی دیجیتال,دورومتر مشابه ساحل

digital shore durometer,portable shore durometer

portable shore durometer