3000mt Automatic Calibration Magnetic Field Strength Meter Digital Hall Effect Tesla Magnetometer Hgs-106

3000mT Automatic Calibration Digital Magnetic Field Strength Meter Hall Effect Tesla Magnetometer HGS-106

HGS-106 is a handheld digital gauss meter controlled by single chip microcomputer, which can be used to measure the magnetic induction intensity of dc magnetic field, radiation magnetic field and other magnetic fields. The instrument can be carried around, with a wide range, easy operation and clear LCD display. It has many functions, such as measuring/peak maintaining, MT/GS unit conversion, automatic zero adjustment by push button, 300MT/3000MT range conversion, etc.

Main technical indicators

1. Measuring range: 0~300mT~ 3000mt

2. Frequency range: 10Hz~200Hz

3. Accuracy: 0~100mT 1%, 2% above 100mT (measured in uniform magnetic field)

4. Resolution: DC×1:0.00 ~ 300.00mT. 0.01mT

DC× 10:0.0 ~ 3000.0mt 0.1mt

5. Measured magnetic field: dc magnetic field (static magnetic field)

6. Function description: peak maintenance function

Gs (gauss) /mT (millitesla) can be switched freely

7. N/S polarity display during dc measurement. N for positive and S for negative

8. Display button fast automatic zero

9. Ambient temperature: 5℃~40℃

10. Relative humidity: 20%~80% (no condensation)

11. Power supply: four no.5 batteries are externally connected with voltage stabilizing power

12. External size: 150mm (L) ×70mm (W) ×30mm (H)

13. Instrument weight: 450g

14. Display mode: 41/2 LCD

15. Display unit: mT/Gs

16. AC/DC switchable

Operation request:

1. Magnetic field distribution of material surface
2. Working magnetic field produced fro some instrument that as iron-removing device,magnet-selecting machine, magnet chuck, magnet spool and demagnetizing coil
3. Leakage Magnetic iron-surface
4. Do not use the instrument in unappropriate conditions.

5. If you find the value of testing were error in the status ofmeasurement,

   you could loosened the handle of the probe to adjust the screw of the resistance tinily.

6. If don’t ensure that the instrument is operated correctly described below, there would be error or mistake

7. Don’t attempt to repair, or disassemble, and any reconstruct this instrument.

8. Use only recommended power accessories.
9. Don’t connect the terminals of the outer power supply reversely. the inner is plus, the outer is minus.
10. Don’t drop this instrument or the probe down ground. It’ll be damaged by strong vibration.
11. Do not allow hands or other objects with dirt to touch the probe.
12. Avoid using, placing or storing the instrument in places subject to strong sunlight or high temperature, so as to humidity, water, oil, rust air, vibration and others.